A brick fireplace is a beautiful addition to any home. But, if you’re not careful, it can also be a very expensive one. Here are a few tips on how to cover brick fireplace without spending a fortune.
- Remove any existing paint or primer from the fireplace using a paint stripper
- If necessary, repair any cracks or holes in the fireplace with mortar or concrete patching compound
- Use a high quality masonry primer to prime the fireplace
- Be sure to follow the manufacturer’s instructions for application and drying times
- Once the primer is dry, apply a thick layer of masonry paint to the fireplace using a brush or roller designed for use on rough surfaces
- Again, be sure to follow the manufacturer’s instructions for proper application and drying times
- Once the final coat of paint is dry, enjoy your newly updated fireplace!
How to Cover Brick Fireplace With Stone
If your home has a brick fireplace that you want to update, one option is to cover it with stone. This can be a challenging project, but with careful planning and execution, it can completely transform the look of your fireplace. Here are some tips on how to cover a brick fireplace with stone:
1. Choose the right stone. There are many different types and styles of stone available, so it’s important to select one that will complement the overall design of your home. Consider both function and aesthetics when making your selection.
2. Prep the surface. Before you begin applying the stone, make sure the surface of the brick is clean and free of debris. You may need to use a power washer to remove any dirt or grime from the bricks.
3. Apply mortar adhesive. Use a trowel to apply mortar adhesive directly onto the bricks in a thin layer. Work in small sections so that the adhesive doesn’t dry before you have a chance to apply the stone veneer over top.
4 . Lay down the first row of stones . Begin at the bottom of the fireplace and work your way up, laying each stone in place as you go .
Make sure each piece is level before moving on to the next . If necessary , use shims or spacers under each stone to get them perfectly level . 5 .
Continue until all stones are in place .
How to Cover Brick Fireplace With Concrete
If your home has a brick fireplace that you’re not thrilled with, don’t despair – there are ways to change its look without demolishing the whole thing. One popular option is to cover the brick with concrete. This can give the fireplace a sleek, modern look that will complement any décor.
Here’s how to do it: 1. Start by making sure the surface of the brick is clean and free of any debris or loose mortar. If necessary, use a wire brush to scrub away any build-up.
2. Once the surface is clean, apply a layer of masonry primer using a paintbrush or roller. This will help the concrete adhere better to the bricks. 3. Mix up some quick-setting concrete according to the manufacturer’s instructions and spread it over the bricks with a trowel, working from bottom to top in even strokes.
Be sure to smooth out any air pockets or bumps as you go. 4. Allow the concrete to set for at least 24 hours before proceeding further. Once it’s completely dry, you can sand down any rough edges with fine-grit sandpaper and then apply a sealant if desired (this step is optional).
How to Make a Brick Fireplace Look Modern
If you’re looking to update your fireplace, but don’t want to go through a complete renovation, consider giving your brick fireplace a modern makeover. With a little elbow grease and some paint, you can transform your dated fireplace into a stylish focal point that suits your home’s new decor. Here are some tips on how to make a brick fireplace look modern:
1. Start by cleaning the bricks with a wire brush or power washer. This will remove any soot or debris that has accumulated over time. 2. Once the bricks are clean, apply a coat of primer before painting.
This will help the paint adhere better and provide an even finish. 3. When choosing a paint color, opt for something bold and eye-catching like bright white or deep black. These colors will really make the bricks pop and give the fireplace a more modern look.
How to Cover Brick Fireplace With Shiplap
If your home has a brick fireplace that you’re not thrilled with, don’t despair! There are ways to update it and give it new life. One popular option is to cover the brick with shiplap.
Shiplap is a type of siding that consists of overlapping boards. It’s a rustic look that is often used in country-style homes. But it can also look great in more modern homes as well.
Shiplap is relatively easy to install, so it’s a project that most do-it-yourselfers can handle. Here’s how to cover a brick fireplace with shiplap: 1. Start by measuring the area you want to cover and then head to your local home improvement store or lumberyard to purchase the necessary materials.
You’ll need shiplap boards (which come in various widths), trim pieces, and construction adhesive. 2. Cut the shiplap boards to size using a circular saw or power miter saw. If you’re working with tongue-and-groove boards, you may need to use a jigsaw for some of the cuts.
Make sure all of your cuts are straight and accurate – this will make installation easier and result in a neater finished product. 3. Apply construction adhesive to the back of each board and then press them into place on the brick wall, starting at the bottom and working up. Overlap each board slightly as you go until the entire area is covered . . .
Can a Brick Fireplace Be Refaced?
There are many ways to update a brick fireplace without starting from scratch. One popular method is to reface the fireplace with new materials. This can be done by adding a new layer of bricks, stone veneer, or even stucco over the existing brickwork.
If you want to retain some of the original brick look, you can opt for a thin veneer that mimics the appearance of full bricks. Another way to refresh your brick fireplace is to paint it. This will require some prep work, such as cleaning and priming the surface, but it’s an inexpensive way to give your hearth a whole new look.
You can choose any color you like, but white or light gray paints are particularly popular for covering up dated brick fireplaces. If you’re not interested in completely hiding your existing brickwork, there are still ways to update its look. For example, you could install new mantel shelves or surround trim made from wood, marble, or metal.
Or try hanging artwork on the wall above the mantel to add visual interest and break up all that red brick.
What Can I Cover an Old Fireplace With?
If you have an old fireplace that is no longer in use, there are a few different ways that you can cover it up. One option is to simply hang a piece of art or a mirror above the fireplace. This will add some visual interest to the room and help to camouflage the unused fireplace.
Another option is to build a false wall in front of the fireplace. This can be done with drywall or plywood and then finished off with paint or wallpaper. If you want to keep the fireplace as-is but don’t want it to be the focal point of the room, you can place furniture in front of it.
A sofa or bookshelf placed directly in front of the fireplace will help to downplay its prominence.
How Do You Update a Brick Fireplace?
If you have a brick fireplace that is in need of an update, there are a few things you can do to give it a fresh new look. First, you can painting the bricks. This will instantly transform the look of your fireplace and make it more modern.
If you don’t want to paint the bricks, you can also add a tile surround. This will also give your fireplace a new look and make it more updated. Lastly, you can replace the mantel and hearth with new ones.
This will really change the overall look of your fireplace and make it look completely different. Whatever route you decide to go, updating your brick fireplace is a great way to refresh your home’s appearance.
How Do I Change My Fireplace from Brick to Stone?
If you’re looking to change your fireplace from brick to stone, there are a few things you’ll need to do. First, you’ll need to remove the existing brickwork. This can be done with a chisel and hammer or by hiring a professional.
Once the brickwork is removed, you’ll need to clean up the area so that it’s ready for the new stone. Next, you’ll need to select the type of stone you want to use for your fireplace. There are many different options available, so be sure to choose something that will complement your home’s style.
Finally, you’ll need to install the new stone work. This can be done yourself if you’re handy with tools, or you can hire a professional masonry contractor to do it for you.
Conclusion
If you have a brick fireplace that you would like to cover, there are a few things you need to consider. First, you need to decide if you want to cover the entire fireplace or just part of it. Second, you need to decide what material you want to use to cover the fireplace.
There are many options available including wood, stone, tile, and even paint. Third, you need to take into account the size of your fireplace and make sure that the material you choose will be able to cover it completely. Finally, once you have all of these factors considered, it is time to start covering your brick fireplace!
